in Без рубрики

slide bearings

Here we will show you slide bearings. You can see all the products from the review of our slide bearings.
We have created a list of Best slide bearings of 2017.

slide bearings

SaleBestseller No. 1
Goplus Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit (16 PCS)
  • 【High Hardness and Toughness】This is Goplus bearing puller set, which has high hardness and toughness. Collets are made from chrome molybdenum steel, and rust-proof finish of tool set for long-lasting using.
  • 【Wide Range of Applications】With different size and type of collets, Blind / Internal /Bearing Puller, this tool set fit a wide range of applications.
  • 【Easy to Use】Insert collect, expand it to fit the hole, and attach the slide hammer assembly.
SaleBestseller No. 2
Liberty D80622C-ZP-W 22-Inch Ball Bearing Drawer Slides
  • Zinc plated finish
  • 22-Inch full extension
  • 1 pair per package
Bestseller No. 3
HICTOP Linear Motion Ball Bearing CNC SCS8UU Slide Unit Bushing Linear Roller Bearing Slide Block
  • Inner Diameter: 8mm/0.315"
  • Linear bearing is widely applied to electronic equipment, such as 3D printer
SaleBestseller No. 4
LIBERTY 942405 Soft-Close Ball Bearing Drawer Slide, 24-Inch, 2-Pack
  • Zinc plated, steel construction ball bearing slides are rated for medium-duty use (loads up to 50 lbs.)
  • Detailed instructions and mounting hardware included for easy installation (additional brackets needed for face-frame drawer construction)
  • Featuring soft-close functionality to close any drawer softly and silently
SaleBestseller No. 5
OTC 4579 9-Way Slide Hammer Puller Set
  • Pulls flange-type rear axles and most front-wheel drive hubs
  • Internal and external jaws provide a variety of combinations to pull bearings gears and seals
  • Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs
SaleBestseller No. 6
Friho 5 Pair of 20 Inch Hardware Ball Bearing Side Mount Drawer Slides, Full Extension, Available in 12'',14'',16'',18'',20'' Lengths
  • 5 pair,20 inch,Mounting screws included screws included.
  • Made from high-grade cold rolled steel that is electrom zinc plated.
  • Steel ball-bearing action that offer less noise at closing and opening
Bestseller No. 7
Ztech 5pcs Blind Inner Internal Bearing Puller Slide Hammer Set
  • Bearing Extractor Collets With Internal Capacity From 3/8" (10mm) To 1-1/4" (32mm)
  • Open Clamps By Turning Handle Clockwise To Snug Against The Bearing For Pulling Out Evenly Without Damage The Parts
  • Bearing Extractor 1: 3/8" to 1/2" (10mm-14mm) ;Bearing Extractor 2: 9/16" to 11/16" (15mm-19mm)
Bestseller No. 8
Decorite 14" Inch - 45mm Ball Bearing Drawer Slide - 100 Pound - Side Mount - Pair (14 Inch)
  • Decorite sets the standard with its 45mm 100-lb. drawer slide.
  • Trusted by the largest oem manufacturers for decades.
  • these slides are sure to suite your requirements. All sizes have met the ANSI and BIFMA testing required by the housing industry.
Bestseller No. 9
Btibpse 8 inch Drawer Slides Full Extension Telescopic Ball Bearing Slide Rail 2pcs
  • Product Name: Drawer Slide
  • Size(Folded): 8"x1.8"x0.5"(L*W*H)
  • Main Color: Black, Never rust
Bestseller No. 10
AmazonBasics Ball Bearing Drawer Slides, 10", Nickel Plated-Steel, 2-Pack
  • Nickel-Plated Steel Finish
  • 100-lbs max weight capacity
  • Length: 10-inch (250mm)

Here we are gonna show you slide bearings. You can see all the products from our slide bearings reviews.

  • Enjoy a lot of fun by selecting your slide bearings.
  • First of all, we are showing you table of the best slide bearings for your better orientation to buy slide bearings.
  • Below this table is a detailed list of all slide bearings by our review sorted by best seller rank.

The results of our review tests are based on the many slide bearings and tried to choose with this test.

TOP 30 slide bearings

SaleBestseller No. 1Bestseller No. 1
Goplus Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit (16 PCS)
  • 【High Hardness and Toughness】This is Goplus bearing puller set, which has high hardness and toughness. Collets are made from chrome molybdenum steel, and rust-proof finish of tool set for long-lasting using.
  • 【Wide Range of Applications】With different size and type of collets, Blind / Internal /Bearing Puller, this tool set fit a wide range of applications.
  • 【Easy to Use】Insert collect, expand it to fit the hole, and attach the slide hammer assembly.
Bestseller No. 2Bestseller No. 2
AmazonBasics Ball Bearing Drawer Slides, 14", Nickel Plated-Steel, 2-Pack
  • Nickel Plated-Steel Finish
  • 100-Lbs max weight capacity
  • Length: 14-inch (356mm)
SaleBestseller No. 3Bestseller No. 3
3D Printer Linear Ball Roller Bearing Slide Block Comgrow
  • Inner Diameter: 8mm/0.315"
  • Packing: 4pcs packed. Mounted with 4 x M4 screws
  • Single weight is 48 grams
SaleBestseller No. 4Bestseller No. 4
Friho 5 Pair of 20 Inch Hardware Ball Bearing Side Mount Drawer Slides, Full Extension, Available in 12'',14'',16'',18'',20'' Lengths
  • 5 pair,20 inch,Mounting screws included screws included.
  • Made from high-grade cold rolled steel that is electrom zinc plated.
  • Steel ball-bearing action that offer less noise at closing and opening
SaleBestseller No. 5Bestseller No. 5
8milelake 5pc Blind Hole Pilot Bearing Gear Puller Slide Hammer Removal Repair Kit
  • Bearing Extractor Collets With Internal Capacity From 3/8" (10mm) To 1-1/4" (32mm)
  • One Slide Hammer Assemble & Clamp
  • Open Clamps By Turning Handle Clockwise To Snug Against The Bearing
Bestseller No. 6Bestseller No. 6
Decorite 12" Inch - 45mm Ball Bearing Drawer Slide - 100 Pound - Side Mount - Pair (12 Inch)
  • Decorite sets the standard with its 45mm 100-lb. drawer slide.
  • Trusted by the largest oem manufacturers for decades.
  • These slides are sure to suite your requirements. All sizes have met the ANSI and BIFMA testing required by the housing industry.
SaleBestseller No. 7Bestseller No. 7
OTC 4579 9-Way Slide Hammer Puller Set
  • Pulls flange-type rear axles and most front-wheel drive hubs
  • Internal and external jaws provide a variety of combinations to pull bearings gears and seals
  • Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs
SaleBestseller No. 8Bestseller No. 8
Liberty D80616C-ZP-W 16-Inch Ball Bearing Drawer Slides
  • Zinc plated finish
  • 16-Inch full extension
  • 1 pair per package
Bestseller No. 9Bestseller No. 9
Btibpse 8 inch Drawer Slides Full Extension Telescopic Ball Bearing Slide Rail 2pcs
  • Product Name: Drawer Slide
  • Size(Folded): 8"x1.8"x0.5"(L*W*H)
  • Main Color: Black, Never rust
SaleBestseller No. 10Bestseller No. 10
LIBERTY 942205 Pair of Soft-Close Ball Bearing Drawer Slide, 22-Inch
  • Zinc-plated, steel construction ball bearing slides are rated for medium-duty use (loads up to 50 lbs.)
  • Detailed instructions and mounting hardware included for easy installation (additional brackets needed for face-frame drawer construction)
  • Featuring soft-close functionality to close any drawer softly and silently
Bestseller No. 11Bestseller No. 11
Four (4) SCS8UU Linear Motion Ball Bearings - 8mm CNC Slide Bushing
  • Inner Diameter: 8mm / 0.315"
  • Length: 30.23mm / 1.36"
  • Weight: 210g
SaleBestseller No. 12Bestseller No. 12
WE3M26 and 2 of WE1M481 and 2 of WE1M333 Dryer Bearing, Slides / Glides Combo Kit
  • With this Purchase you will receive
  • Qty 1 of WE3M26 & Qty 2 of WE1M333 & Qty 2 of WE1M333
  • Front Upper Bearing and Slide Kit
Bestseller No. 13Bestseller No. 13
SC8UU Linear Motion Ball Bearing CNC Slide Bushing
  • Precision Ground Exterior for a Perfect Fit
Bestseller No. 14Bestseller No. 14
Promark 20 Inch 100 LB Capacity Full Extension Soft / Self Close Ball Bearing Side Mount Drawer Slides - 10 Pair Pack
  • Mounting: Side Mount - Clearance: 1/2" + 1/32" -1
  • Material: Cold Rolled Steel - Hole Pattern: 32mm - Capacity: 100 lbs.
  • Industry Rated: BHMA, KCMA, BIFMA, ANSI, SEFA 8.99
Bestseller No. 15Bestseller No. 15
Bestseller No. 16Bestseller No. 16
Pair of 12" Rok Hardware Soft Close Drawer Slides, Full Extension, Ball Bearing - Available in 12", 14", 16", 18", 20", 22" and 24" Lengths
  • No more slamming drawers with these full extension soft close drawer slides!
  • Soft-close device dampens and absorbs force, causing it to close slowly and quietly.
  • Extremely light with a 2" soft close stroke. Pull force of 5.5 to 6.5 lbs
Bestseller No. 17Bestseller No. 17
TOOTO Brand New 4Pcs SCS8UU 8mm Linear Motion Ball Bearing Replacement CNC Slider Slide Bushing 34.5mm Length
  • Inner Diameter: 8mm/ 0.315"
  • Linear bearing is widely applied to electronic equipment
Bestseller No. 18Bestseller No. 18
GlideRite Hardware 2270-ZC - 22-inch 100 Lb. Full Extension Ball Bearing Drawer Slides with 1" Over-travel (10 Pairs)
  • 10-pairs 100 Lb. GlideRite Hardware 70 Series full extension slides with 1" over-travel
  • Side mounted, non handed design, positive stop, with common 32mm hole pattern
  • Steel ball-bearing action slides that are remarkably smooth and quiet
Bestseller No. 19Bestseller No. 19
ABN Blind Hole Inner Bearing Puller 5-Piece Set – Slide Hammer & Collets 11mm-32mm for Removing Bearings, Dents, Locks
  • Practical: The ABN Blind Hole Inner Bearing Puller 5-Piece Set - Slide Hammer & Collets 11mm-32mm for Removing Bearings, Dents, Locks is your solution for extracting small bearings without damage
  • Durable: Constructed from drop forged steel with a fully chromed carbon steel slide hammer
  • Easy Storage: 15" x 10.5" x 3" (38cm x 26.7cm x 7.6cm) heavy-duty blow-molded plastic carrying case for easy transportation, simple storage, and maximum organization
SaleBestseller No. 20Bestseller No. 20
Maytag Dryer Bearing Slide Replacement Kit (Set of 2) - Whirlpool Part # 306508
  • Maytag Dryer Bearing Slide
  • Manufacturer Part # 306508
  • Whirlpool Dryer Kit
Bestseller No. 21Bestseller No. 21
HICTOP Linear Motion Ball Bearing CNC SCS8UU Slide Unit Bushing Linear Roller Bearing Slide Block
  • Inner Diameter: 8mm/0.315"
  • Linear bearing is widely applied to electronic equipment, such as 3D printer
SaleBestseller No. 22Bestseller No. 22
GlideRite Hardware 2470-ZC-10 24 inch Side Mount Full Extension Ball Bearing Drawer Slides with 1 inch Over-Travel 10 Pack 24" 1", 100 lb, Silver
  • Quantity: 10 pairs
  • Dimensions: 23-5/8 inches length x 1-3/4-inch width
  • Length fully open: 48-1/4 inches
Bestseller No. 23Bestseller No. 23
3Pc Set Rear Axle Bearing Remover Puller Slide Hammer Remove Semi-Floating Tool Kit
  • Pullers: 1" to 1-7/8", 1-5/16 to 2-3/8", 1-3/8" to 2-7/8"
  • Quickly and easily to remove semi-floating rear axle bearings
  • Includes three pullers to service most domestic cars
Bestseller No. 24Bestseller No. 24
One Pair (2pc) - 8" 100lb Heavy Duty Full Extension Ball Bearing Drawer Slides
  • One Pair (2pc) - 8" 100lb Heavy Duty Full Extension Ball Bearing Drawer Slides
  • Load Rating: 100lb dynamic, 200lb static, ANSI/BHMA Grade 1 HD-100 Travel: Full extension.
  • Perfect use such as organizing multiple file drawers, pull out cutting boards, or keyboard trays.
Bestseller No. 25Bestseller No. 25
9 Way Slide Hammer Axle Bearing Dent Hub 2 3 Internal External Gear Puller Set
  • This 9 way slide hammer puller set is designed for use with other 5/8" - 18 thread slide hammer attachments.
  • Internal and External Jaws provide a variety of combinations to pull bearings, gears and seals.
  • Pulls Flange-type rear axle and most front wheel drive hubs.
Bestseller No. 26Bestseller No. 26
BESUNTEK Drawer Slide 28cm/11 Inch 2 Sections Cabinet Slide Rail Tracks Ball Bearing Full Extension Side Mount Type Silver Tone 2pcs
  • Product Name: Drawer Slide;
  • Main Color: Silver Tone; Material: Metal;
  • Folding Size: 28.5 x 2.4 x 1cm/11" x 0.9" x 0.39" (L*W*T); Feature: 2 Sections;Unfolding Length:47cm/18.5''; Weight: 200g;
Bestseller No. 27Bestseller No. 27
uxcell LM20UU 20mm Linear Motion Ball Bearing Slide Bushing
  • Product Name : Linear Motion Ball Bearing;Model : SCS20UU
  • Material : Metal, Rubber;Inner Diameter : 20mm/ 0.79"
  • Screw Hole Dia(Each) : 5mm/ 1/5";Pitch : 40 x 40mm/ 1.6" x 1.6"(L*W)
Bestseller No. 28Bestseller No. 28
Key Board Slide, 18", Ball Bearing, Black
  • 50 lb weight capacity
  • Includes 4 reversable mountaing brackets
  • Lock-In Lock-Out capability
Bestseller No. 29Bestseller No. 29
Neiko 20721A Pneumatic Rear Axle Bearing Puller Service Kit | Includes Case | 3-Piece Set
  • Allows for easy removal of semi-floating rear axle bearings
  • Standard SAE sizes, set works on most domestic/American cars
  • Washer captures the bearing firmly, distributing the applied force over the entire bearing and preventing damage

With the help of these slide bearings reviews we can choose best winner!

When looking for the new slide bearings, we are helping you find the right product in our review experience.

Written By:

Add a Comment

Your email address will not be published. Required fields are marked *